POWDERED METAL PARTS

Parts of all size and complexity at or very near to final dimension.              
Materials include iron, steels, brass, stainless, copper & custom alloy blends.
Sizes from several ounces to over 70 pounds.
Secondary operations include machining, finishing, coating, plating & assembly

Sintering processes include Full Density PM, Metal Injection Molding (MIMS), Structural PM and Controlled Porosity. Design, material & process evaluation.

DEEP DRAWING

Products include cups, caps, covers, shells, tubular parts, pans, enclosures, etc.
Tolerances held to plus or minus .0007 of an inch. Drawing depths to 15 inches. 
Materials include Steel, Stainless Steel, Brass, Aluminum & Exotic Alloys.
Secondary operations include machining, coating, plating, welding & assembly.

MEDIUM TO HEAVY METAL STAMPINGS

Products include brackets, braces, shims, pans, covers, tanks, bumpers, plates.
Presses from 35 to 2,200 ton. Bed lengths to 202". Sheet thickness to 0.875 ".
Materials include most carbon steels, alloys, stainless and aluminum.
Secondary operations include machining, tapping, painting, coating & assembly. 

METAL FINEBLANKING

Presses range from 40 to 1,400 tons. Thickness from 0.005 to 0.750 inches.
Dimensions sub-miniature to 14x14 inches. Tolerances within 0.001 of an inch.
Secondary operations include grinding, plating, coating, machining & assembly.

COLD FORMED METAL PARTS

Diameters from .065 inches. Lengths up to 24.0 inches.
Materials include carbon steel, stainless, alloys, copper, brass, bronze, nickel.
Operations include heading, threading, knurling, tapping, slotting & chamfering.
Secondary operations include heat treating, machining, finishing & assembly.

DIE CASTINGS

Dimensional capabilities from subminiature to over 50 lbs. To near net shape.
Materials include Zinc, Magnesium, Brass, Bronze, Aluminum & ZA Alloys.
Secondary operations include Machining, Finishing, Painting, Plating & Assembly.

INVESTMENT CASTINGS

Sizes from fraction of an ounce. Thin-wall designs (to 0.020 inches). 
Secondary operations include Heat Treating, Machining, Finishing & Assembly.
Materials include most Ferrous and Non-Ferrous Alloys.

SAND CASTINGS

Parts weighing less than an ounce on up to thousands of pounds.
Materials include Aluminum, Brass & Bronze.
Secondary operations include Machining, Polishing, Painting, Coating & Assembly.

SCREW MACHINE PARTS: Metal Inserts, Fittings, Connectors, Shafts, Screws, Couplers, Bearings, etc.

Equipment includes a wide array of Single & Multi-Spindle Automatics.

Lengths from 0.02 of an inch to over 48. inches.

Diameters from 0.02 of an inch.

Tolerances down to plus or minus 0.0005 of an inch. Very complex designs.

Volumes from 100 to 100 million pieces annually. Batch & continuous production.

Materials include Steels, Brass, Aluminum, Copper, Special Alloys, Non-Metallics.

Secondary Operations include Grinding, Heat Treating, Plating, Thread Rolling, Deburring, Gear Hobbing & Assembly.

CNC MACHINING: CNC Milling & Turning, Precision Machining, Grinding, CNC Lathes, Finishing, etc.

Dimensions from Ultra-Miniature to parts over 15,000 lbs. Multi-axis machining.
Tolerances down to plus or minus 0.0002 of an inch.
Markets include Automotive, Aerospace, Medical, Electronic & Military.
Volumes range from a single part to continuous production runs.
Materials include Steels, Copper, Brass, Titanium, Aluminum, Plastic & Exotics.

Stock includes Bar, Plate, Blanks, Castings, Forgings and Stampings.